Nov.30, 2011

Asiga announced to release the world's first 3D Printer using UV LED System.

This 3D printer, light and tiny, weighs in at only 10.5 kg.  It is named Pico, will be the first 3D printer using an an ultraviolet 385 nm LED light source which has up to 50,000 hours life time. What does that mean? It means the printer can consistantly perform without having to replace the light source. Consequently the cost of printing will be lower. 

The Pico system has two build modes: 

F-mode with 50 microns XY accuracy, build size 30 x 40 x 100 mm 

UF-mode with 37.5 microns XY accuracy, build size 19 x 25.4 x 100mm 

Users can select the Z layer thickness between 1 micron and 200 microns in 1 micron increments. 

The Machine Size is 220 x 225 x 505 mm

According to TCT news, the price of the Pico 3D printer will be US$6990, comparing with major brands in the market with same performance this printer offers best value for money. The pico 3D printer will be used in industries including Dental, Jewellery, hearing, medical etc for high resolution parts.

Here are some Pico samples:



Via TCT News and Asiga



Posted in 3D Printers

Related articles:



Alex wrote at 3/23/2014 9:20:36 AM:

ASIGA Printer becomes a very good investment if the counter is deactivated . This company offer this 3dnocounter.com . Print Excellent resolution models with just any resin material!

Larry webber wrote at 1/21/2014 2:15:38 AM:

the wort machine you can get.

Stephen Miles wrote at 10/27/2013 12:20:47 PM:

pleas Contact

Sidney Link wrote at 3/14/2013 4:46:28 PM:

will your printer work with matrix and it i send you a drawing will you print it so i can see a ring done by this printer. oh are you going to be at the smart show in Chicago i could see it there if you are

Faheem wrote at 4/17/2012 11:48:46 AM:

Hello are a small goldsmith workshope in lahore Pakistan heared about your machine asiga 3D printer long awaited by people in our Province, because price of availabe 3D printers for jewllary work is too high as compare to your machine. I am pritty much interested in your machine, but here are some points i want to confirm before purchase: what kind of meterial is used for 3D printing in asiga 3D printing machine, because here in our country some people have the misshaps that they bought the machines for 3D jewllary printing and later came to know that material used by machine is not castable for jewellary in pakistan. Is there any possibility that i get few physical sampels of 3D printing of my own jewellary designs which i coud send you as per your response. i am ready to pay the standerd price of jobs in advance as per your demand. in case of any mechanical and technical support needed or in case of any repair need here in pakistan what are the current available options.

Paolo Mazzon wrote at 1/9/2012 11:28:49 AM:

Hello we are a small goldsmith's shop in the province of Padua, Italy we have seen your new prototype ASIG wanted to know a little more detail, and fondibile, quality. Our contact is oreficeria@gioielleriamazzon.it

Ashley Tester wrote at 12/7/2011 12:50:08 AM:

How do i find out more about the printing quality of this piece?



Leave a comment:

Your Name:

 


Subscribe us to

3ders.org Feeds 3ders.org twitter 3ders.org facebook   

About 3Ders.org

3Ders.org provides the latest news about 3D printing technology and 3D printers. We are now seven years old and have around 1.5 million unique visitors per month.

News Archive