The 3D printed flying crawler designed and built by Flappingwing in Japan is a multi-winged RC ornithopter. The 3D model was created in Autodesk 123D and main parts were 3d printed on Shapeways.
Flappingwing commented on the 3D printed parts: They need to be lightly sanded because they were rough on the surface. The parts were printed by selective laser sintering technology (SLS) which uses a high power laser to fuse plastic powders to form a 3D shape, therefore it is not so smooth as parts from the stereolithography process.
(parts printed with selective laser sintering technology)
(parts printed through stereolithography process)
But it has pretty good dimensional accuracy. The rotation of the crank gear is impressively smooth, exactly the same as the design. However the assembled ornithopter is a little heavier than the original design because some printed parts are thicker.
- Width: 440mm
- Length: 600mm
- Weight: 22g (Including batteries 70mAhLi-po)
(All images credit: FlappingWing)
The 3D printed flying crawler is powered and controlled by 2 motors. Flappingwing made two flight test videos and it is proved 3D printed flying crawler can also have a smooth flight. Watch the video below the flying crawler in action.
Posted in 3D Printing Applications
Maybe you also like:
- 3D printing fashion accessories with nylon
- Creative use of 3D printing: A sandstone block built from lego
- World's first 3D printing photo booth to open in Japan
- NASA using 3D printing to build the next generation of rockets
- Using 3D printing to re-imagine classic Eames chair
- US army researchers use Printrbot 3D printer for rapid prototypes
- How to 3D print a Google Earth building using DIY 3D printer
- Build your own 3D-printable silent_runner airship
- 3D printed gold-plated Arc of the Covenant
Tan201 wrote at 9/2/2015 8:46:05 AM:
How are you able to make the "Flying Crawler Mk.2(3D-printed ornithopter)" change direction or go left/right?? You have used two motors for flapping the wing?? Please explain.
-Us wrote at 1/5/2015 3:16:05 PM:
THIS WAS OUR IDEA