Mar.6, 2013
High resolution Stereolithography, resin-based 3D printer is out of reach for most of us - until now. Justin Hawkins is working on developing a low cost, build-it-yourself, high resolution SLA 3D printer sLAMPS for 3D printing community.
The printer works using a galvanometer and mirrors to steer a laser into a cured vat of resin. The resin cures at 405nm (which the laser puts out) and turns the liquid pool (Of Zero VOC Environmentally friendly resin) into 3D objects.
Not like the current existing SLA 3D printer, sLAMPS' software and firmware are open source. It consists of parts that can be easily sourced and printed at home. The design files will be shared for everyone to use.
The printer is still a beta version. So far Justin has built the sLAMPS 1.0 3D printer and tested electronics. Currently he is on getting the right vat coating and build platform to get good adherence during printing. He has tested two different PCB build platforms and it turns out that acrylated resin doesn't stick well on pcb surfaces but well on acrylic.
Specifications on the potential print size and resolution are still to be decided, according to Justin, the print bed is about 80mm x 80mm x 100mm, and layer height will be configurable, anywhere from 0.001mm to 0.2mm.
Justin launched a funding campaign on indiegogo for further development of the openSL 3D printer, sourcing affordable materials and tools. For $1,095 you can receive a complete kit, without case, including all the electronics you need (Laser, Laser Iris, Galvanometers, Galavanometer Driver Boards, Power Supply, Printer Control Board, Stepper Motor), plus the vat (pre-coated), printer chassis and the plastic parts. The estimated delivery time is around May 2013. And a build guide will also be released at the end of the campaign. You can find more information in the video below. If you would like to give feedback on his design or support this project, you can find information here on Indiegogo, still 7 days to go before the campaign ends.
Thanks to Tune for the tip.
本站所有文章版权归3ders.org所有,未经许可不得翻译或转载。
Posted in 3D Printers
Maybe you also like:
- Arcam launches new 3D printer; stock gains after new U.S. aerospace order
- New Kevvox DLP 3D printers available for Australia and New Zealand market
- Solidoodle to launch 3D printing lifestyle stores in Russia, Ukraine and Kazakhstan
- EnvisionTEC unveils 3Dent 3D printer for high-quality dental models
- Japanese office supplies company developed its first 3D printer
- Introducing Kühling&Kühling RepRap industrial 3D printer
- Ultimaker has a "3D Joy" version in China
- RepRapPro launches open-source Tricolour Mendel 3D printer
- Awesome SCARA arm 3D printer makes it's first moves (video)
- DeltaMaker 3D printer successfully funded, heading into production
Just curious.. What is brand/model of the galvo's?
Peter T wrote at 3/6/2013 3:09:00 PM:
Interesting project ... will it encounter the same fate as MIT's Formlab, flak from 3D system patent trolling?