Mar.14, 2013
In Stereolithography a product is created layer by layer by illuminating a photo-curable ultraviolet curable photopolymer "resin". For each layer, the laser beam traces a cross-section of the part pattern on the surface of the liquid resin. Exposure to the ultraviolet laser light cures and solidifies the pattern traced on the resin and joins it to the layer below.
This method can create high accuracy with excellent stability. Unirapid Inc in Japan developed a small SLS 3D printer Unirapid III which is claimed to have the 3D printing quality the same as those costing 200,000 to 500,000 US dollars.
The whole printer is specialized for printing very detailed designs, with a maximum build envelope of 150 × 150 × 150mm. The machine prints with a minimum of 0.05mm per layer.
The resin material can be used in this SLS machine is ProtoGen 18420 from DSM, a liquid, ABS-like, photopolymer that produces accurate parts. In addition it can also use NanoTool from DSM to produce strong, stiff, high temperature resistant composite parts.
The UNIRAPID III is suitable for making high resolution parts for research and development, but it is not recommended to make large models because the speed of construction is slow.
Here are some 3D prints examples from the UNIRAPID III.
Material: ProtoGen18420 (ABS-like, high resolution)
Model: a small cube 2.5 x 2.5 x 2.5 mm
3D Printing time: 32 minutes
Material: ProtoGen18420
Model: 10mm x 15mm x 1mm
3D printing time: 2 hours 28 minutes
Material: ProtoGen18420
Printing time: 1 hour
Material: ProtoGen18420
Model: hollow pipe outside diameter 3mm, inside diameter 2mm
3D Printing: 6 hours
Material: NanoTool (containing fine particles of ceramics, high temperature resistant, ultra robust)
3D Printing: 3 hours
Material: NanoTool
Model: height 0.6mm, thickness 0.1mm
3D Printing: 39 minutes
In addition, the company has also developed a Micro-stereolithography device for laboratory the URM-HP301, a starter kit for micro modeling. It uses HeCd laser to cure colorless acrylic resin. The HeCd Laser beam diameter is about 7μm, and build envelope is maximum 30mm XYZ. It has no covers so customers can make own changes. The price of the device is 9 million yen (around 90,000 USD), tax not included.
Check out the mini samples of the URM-HP301.
(Images: Unirapid)
Thanks to Jeff for the tip and help with translation!
本站所有文章版权归3ders.org所有,未经许可不得翻译或转载。
Posted in 3D Printer
Maybe you also like:
- Stratasys launches Objet30 OrthoDesk 3D Printer for smaller labs and clinics
- 3D printing experience at Alfa Romeo stand in Geneva Motor Show 2013
- Gigabot: A large format 3D printer on Kickstarter
- Building a low-cost light-cured resin 3D printer
- SpiderBot Delta 3D printer launched
- sLAMP, open source mini SLA 3D printer now on indiegogo
- Arcam launches new 3D printer; stock gains after new U.S. aerospace order
- New Kevvox DLP 3D printers available for Australia and New Zealand market
- Solidoodle to launch 3D printing lifestyle stores in Russia, Ukraine and Kazakhstan
- EnvisionTEC unveils 3Dent 3D printer for high-quality dental models
- Japanese office supplies company developed its first 3D printer
- Introducing Kühling&Kühling RepRap industrial 3D printer
- Ultimaker has a "3D Joy" version in China
- RepRapPro launches open-source Tricolour Mendel 3D printer
Dears, appreciate sending us the above mentioned machine price + shipment fees to lebannon/ beirut ?
3Dfilamenta wrote at 8/18/2014 3:27:35 AM:
I am not sure of the cost but most SLA printers are suitable for dental labor because of its detailed prints.
FAISAL wrote at 11/26/2013 8:27:34 PM:
HOW MUSH IT COST ? I MEAN THE PRICE AND IS IT SUITABLE FOR DENTAL LABOR ?