May 20, 2016 | By Benedict
APWorks, a subsidiary of Airbus Group, has built a fully functional 3D printed motorcycle. The vehicle, which has been dubbed the ‘Light Rider’, is made from APWorks’ Scalmalloy material and weighs just 35kg.
Joachim Zettler (left), CEO of Airbus APWorks GmbH, and Airbus Group CEO Tom Enders presenting ‘Light Rider’, the world’s first 3D-printed motorcycle
Ever since APWorks first announced the creation of Scalmalloy, a high-strength aluminum-magnesium-scandium alloy, the Airbus subsidiary has been keen to show off exactly what the material can do. First came this super-lightweight, 3D printed airplane partition, and now an entire vehicle has been made from the stuff. The Light Rider is, admittedly, smaller than your typical Airbus vehicle, but before the aerospace giant 3D prints half its future airplane fleet, this 3D printed motorcycle, unveiled today in Ottobrunn, Germany, demonstrates just why Airbus and APWorks have so much faith in the potential of Scalmalloy. “With the Light Rider we at APWorks demonstrate our vision of future urban mobility,” said engineer Stefanus Stahl.
Weighing in at just 35kg, the 3D printed Light Rider is around 30% lighter than conventionally manufactured e-bikes, can zoom from zero to 45km/h in just three seconds, and has a top speed of 80km/h. The secret to the impressive bike is its 3D printed frame, which weighs just 6kg, part of the reason for the vehicle’s 60km battery life. Although its appearance might take some getting used to, the topologically optimized structure of the frame is designed to eliminate mass where it is not required. APWorks actually developed a special algorithm, inspired by bionic structures and natural growth processes, to work out where material could be eliminated and where it needed reinforcing. The result is a skeletal, almost organic-looking structure, with not a gram of surplus material in sight.
According to APWorks, the lightweight, optimized, 3D printed frame could not have been produced using any other manufacturing technique: “The complex and branched hollow structure couldn’t have been produced using conventional production technologies such as milling or welding,” explained Joachim Zettler, CEO of APWorks. “Advances in additive layer manufacturing have allowed us to realize the bionic design we envisioned for the motorcycle without having to make any major changes. With these technologies, the limitations facing conventional manufacturing disappear.”
APWorks has worked at the forefront of additive layer manufacturing (ALM) and advanced materials since its launch in 2013. "3D-printing technologies have revolutionized the design and manufacturing process – not only in terms of structure and aesthetics, but also in impressive weight savings on parts and equipment," says the company.
To create the incredible 3D printed frame, APWorks used a selective 3D laser printing system to distribute the Scalmalloy powder in layers just 60 microns thick. By 3D printing these parts, APWorks was able to create unusual shapes and reduce mass, while also reaping the other rewards of a bottom-up manufacturing approach: many of the Light Rider’s 3D printed frame parts are hollow, which allowed the designers to integrate cables, pipes, and screw-on points directly into the motorcycle body.
Scalmalloy, the aluminum-magnesium-scandium alloy used by APWorks to create the Light Rider’s frame, is a corrosion-resistant material which purportedly exhibits titanium-like strength. Designed specifically for additive manufacturing purposes, the material combines strength with a high level of ductility, making it ideal for robotics, aerospace, and automotive 3D printing projects.
APWorks plans to build 50 more Light Riders, available to buy for €50,000 each. A €2,000 deposit is required to join the waiting list.
Posted in 3D Printing Application
Maybe you also like:
- Gwendoline Christie stars in Iris van Herpen's 3D printing Show as dress is 3D printed onto her
- Take a look at the world’s fastest 3D-printed R/C car by James Beswick
- New NFC Ring: wearable for unlocking mobile devices, transferring data supports 3D printing
- 3D printed World of Warcraft figures made exclusively by FigurePrints and FabZat
- Valencians plan to build world’s largest 3D printed statue during annual Las Fallas Festival
- Adidas teams with Materialise to present Futurecraft 3D printed sneaker, the future of running shoes
- Kickstarter for DRAGONLOCK, 3D printed dungeon gaming terrain, blitzes $500 target, nears $31,000
- Designer Mary Huang’s 3D printed action figures send positive message to female makers
- Upcoming hilarious stop motion show SuperMansion features unique 3D printed characters
- Make brushing your teeth fun with these fantastic 3D printed tooth brush holders
- You'll soon be able to 3D print Nike shoes at your home, says Nike COO
- Kickstarter underway for GustaVino, a modular 3D printed wine rack
Hi there Would you like to easily see a birds eye view of what your current and past customers think about you? Do you know what people are saying about you? Whether its hurting or helping your business? My name is Paul, the Outreach Director of Five Star Fast Lane, and for the price of, well, nothing --I would like to provide you with a full detailed report on your current business standings. As a bonus, our report scanner will report back with any inaccuracies about your business that are out there potentially causing you loss of revenue and customers. There is no obligation or a catch, the report is yours to use as you see fit. Feel free to make use of it at http://www.fivestarfastlane.info Regards Paul Five Star Fast Lane PS - If you want to discuss the results we are available via live chat daily on the site. Business Review update http://www.fivestarfastlane.info
Jack wrote at 6/14/2016 1:48:56 PM:
I am interested Please contact me by email:jackhonesty@hotmail.com.
Tim Roberts wrote at 5/31/2016 5:03:12 AM:
Can we put it on show at the Hunter Valley Electric Vehicle Festival in Newcastle Australia on 13-14 August 2016 http://www.hunterevfestival.net/ Tim.Roberts@newcastle.edu.au
naveen wrote at 5/22/2016 2:04:21 PM:
so nice
3Ders.org provides the latest news about 3D printing technology and 3D printers. We are now seven years old and have around 1.5 million unique visitors per month.
