Sep 18, 2016 | By Andre
A little bit of online curiosity often leads to nothing but pictures of cats or an update on the weather. But sometimes that same curiosity can, like it did with Hackaday contributer Joshua Vasquez, spiral into the careful construction of an animatronic tentacle.
And this likely would never have happened were it not for the stumbling on upon the Stan Winston tutorial that provided inspiration to the Hackaday monster.
The hackaday tutorial goes into great depth about the mechanics, some of the math and ultimately how its creator was able bypass a lot of the trickier elements found in the Stan Winston video above with Delrin as a source material, a laser cutter and some 3D printed parts. But when you are dealing with the creation of a animatronic anything the moving parts need to be considered as well.
Wanting to allow for four degrees of freedom along two tentacle stages, his design needed a mockup phase and a lot of preplanning so that “in an ideal world, tugging on each stage’s cable would form a perfect arc that decreases in diameter the more we tug.” And while the 3D printed part list or STL files aren’t available at the current time, expect them to be released as the tutorial expands.
In time, it soon became clear that not all of the parts (mainly due to the expensive nature of them) could be sourced in a way recommended in the original Stan Winston video so off-the-shelf parts needed to do. For example, Pololu motor hubs (often found in desktop 3D printers) were used with an extra Delrin plastic cut plate to hold the control cables in the right spot.
As the tutorial draws to its current conclusion (part II and III are yet to come) the introduction to design alternative ideas are addressed by the project’s author. And while this project isn’t necessarily something even the most capable maker can pull off in a weekend, there’s no way of knowing if you don’t try. Joshua Vasquez recommends exactly that by stating that “yes, sliding heat-set inserts into a thermoplastic might be a bit tricky the first time, but it’s nothing outside the bounds of the hacker who can solder up a few through-hole components.”
For me, I’ll probably stick to watching these tentacle animatronic creatures frighten a captive audience before going ahead and building my own. But its somewhat reassuring that if I wanted to, some 3D printing, laser cutting and a lot of effort means I can have one if I wanted.
Posted in 3D Printing Application
Maybe you also like:
- Massivit 3D lends a huge hand to promote the new Ghostbusters movie, and a face
- Falcon Minerals to acquire 100% of 3D printer manufacturer Robo 3D
- Xuberance presents singer Momo Wu with pair of stunning PEBA 3D printed shoes
- Local Motors & Mouser Electronics to put a drone on new 3D printed self-driving car
- How 3D printing will power the Paralympic Games
- Could 3D printing help the fight against child obesity?
- Sightline Maps wants to bring 3D printed geographic models to classrooms around the world
- Amy Purdy opened the Rio 2016 Paralympics in a stunning 3D printed dress
- Two 3D printed Suzhou-style Chinese courtyards are unveiled in Binzhou! Not a single brick was used
- 25 incredible 3D printed cars & automotive projects in the world
- Nervous System unveils amazing 2.0 version of 3D printed Kinematics Petals Dress