Sep 14, 2015 | By Kira
Italian 3D printer manufacturer Ira3D has recently launched a follow-up model to its Poetry2, which they are calling the Poetry Infinity. Just like its predecessor, the Poetry Infinity performs with accuracy, reliability, and a remarkably large build volumea (250x250x300mm), however this ‘superfast’ upgrade has been significantly improved in terms of speed and acceleration.
Utilizing to FLD technology (Fast Layer Deposition), the Poetry Infinity can reach printing speeds of 400mm/s and accelerations of up to 9000mm/s2—a marked improvement over the 180mm/s speed and 3000m/s2 acceleration of the previous model. In terms of resolution, the Infinity can reach up to 15 microns (0,015mm) on the Z axis, resulting in maximum accuracy.
However when it came to upgrades, the developers didn’t stop there. They also included an entirely metal dual extruder, which can reach up to 280°C and is therefore suitable for printing polycarbonate and graphene filaments; a Soluble Support System for printing support structures that are soluble in water or limonene; and the Sidekick and Pheonix systems, which allow you to continue printing without power, and to resume printing after a forced interruption, respectively. 3D printing during an electrical storm never seemed so promising.
The renowned and highly awarded Italian studio, Tonetti Design, has recently collaborated with Ira3D to create a series of functional and elegant designer products, and lauded both the company’s commitment to accuracy and the ‘indispensable’ design possibilities offered by 3D printing.
“In recent years, the improvement of computer graphics has managed to reduce that communication gap between designer and client, but now, 3D printing has solved the problem altogether,” said Gianpetro Tonetti, an Italian architect and designer with a keen sensibility for using new technologies to his and his clients’ advantage. “An image, no matter how beautiful, cannot be held, felt, looked at from different perspectives, but an object can… Nowadays, not using 3D printing as a work tool probably means missing out on many opportunities. 3D printed prototypes also help me while I am still working on a design; they allow me to make the necessary adjustments and may even give me new ideas. I think this summarizes well the utility of this tool, indispensable even if just to verify the validity of a project or an idea. In my opinion no design studio can ignore this technology, it would be foolish".
3D printed lamp, designed by Tonetti Designs and created entirely on an Ira3D printer
Working with Ira3D and their Poetry2 model 3D printer, Tonetti came up with a range of 3D printed objects, from small industrial components to garden furniture. One of their designs, an elegant and modern-looking ‘reclinable lamp,’ was made of just three separately printed pieces, all made out of organic and biodegradable plastics. “This is a delicate project, created specifically to demonstrate the unlimited potential of the 3D printer,” said Tonetti. “Our project aims to show that it is possible to create functional and beautiful designer products.”
This pilot project is just the beginning of what Ira3D and Tonetti see as an ongoing collaboration, during which they can create affordable and useful products. Currently, the Poetry Infinity 3D printer is available for pre-order via Ira3D’s website, and currently sells for €2,389 (roughly $2,700 USD).
Posted in 3D Printers
Maybe you also like:
- Massive 'The Beast' 3D printer coming to Kickstarter - 'big enough to print a child'
- Taiwan's Addwii announces the X1, low-cost full-color binder jetting 3D printer for $20,000
- Gizmo 3D DLP printer now capable of 3D printing teeth, features improved software & metal embedding options
- Lund University team led by Olaf Diegel builds mobile concrete 3D printer to 3D print furniture
- Choc Edge unveils new Choc Creator 2.0 Plus chocolate 3D printer
- WEISTEK unveils ultra-fast desktop 3D printer 'IdeaWerk-Speed', reaching speeds of 450 mm/s
- Cosine Additive unveils AdditiveMachine1 large-format composite material 3D printer
- UK teenager to launch expandable NFire One modular 3D printer priced under $400
Recommend against them I try to be objective when giving comments, and im not one to really bash companies but I would strongly recommend doing some serious thinking before buying a poetry2! Normally the Italians have good products, and its not bad but wow they must have good marketing cause the are way over rated and a below benchmark printer. They have terrible customer service also which, especially considering their prices. A little back story.I bought a ira3d poetry2 at Christmas. I have got to admit for the price of $2000, plus their care package I thought it was a wise buy and that ìd be getting a high quality product! Actually up to 4 months ago would have recommended an IRA3D printer. My printer started having issues with the heated bed heating up. I contacted Customer Service they replied to me asking for proof of purchase. I sent them the receipt and a few days later they replied that I should go through the settings with them and check the wiring. I am quite literate with 3d printers and already tried all the connections. Nothing was resolved so I contacted them again and they said they would try and help me again, 3 days later they send me a message with saying that they would look into the issue and try and find a solution. Still no answer. After multiple times of being in contact with them I realize that they have no idea what they are doing or what they even produce. 5 business days later I receive yet another email asking for me to send them my printer at my shipping cost for repair. Great Care.. I finally give in and sent it to them. After about a week of no response I called them and they told me they will look at the printer tomorrow that they will update me tomorrow, of course no response so I call and get the same answer. After 2 more weeks of calling daily, they know my case by my first name now, they send out my printer. I receive the printer in worse condition then I sent it to them, plastic is chipped and broken and the carriage is completely broken in multiple spots. To sum it up, they are not sending me a new one, the one I have is crap, and I have no solution. 3000$ in the trash bin.
Grant wrote at 12/20/2015 2:45:31 AM:
I support comments above. I also have a Poetry 3D printer. No handbook or data was supplied with the machine, and the number one extruder was blocked and does not work. The CEO is offensive and immature.He makes promises which he does not keep. I am sending my machine back to IRA also.
Michael Friedrich wrote at 12/17/2015 3:46:59 PM:
We are very disappointed with Ira3D. Having ordered and paid for the printer on October 4, 2015 (with the written promise of having it delieverd within two weeks, thus around October 18, 2015), we still haven't received anything else than broken promises, both from the sales team as well as the CEO himself. This all is a highly disappointing experience, and I do not recommend doing business with them.
Michael Friedrich wrote at 12/17/2015 3:46:15 PM:
We are very disappointed with Ira3D. Having ordered and paid for the printer on October 4, 2015 (with the written promise of having it delieverd within two weeks, thus around October 18, 2015), we still haven't received anything else than broken promises, both from the sales team as well as the CEO himself. This all is a highly disappointing experience, and I do not recommend doing business with them.
Pierre wrote at 12/9/2015 11:22:34 AM:
I've got one.... We do not manage to have it working even at low speed... By the way, one of use has 6 years experience in 3D printing, after 2 weeks of trying, we are sending it back to IRA... :-(
Curious Guy wrote at 9/15/2015 2:23:13 PM:
Are there any proofs or videos of this printer printing this fast and still acurate? Their website kind of gives no proven information right now :(
3Ders.org provides the latest news about 3D printing technology and 3D printers. We are now seven years old and have around 1.5 million unique visitors per month.
