May 22, 2017 | By Julia
Swedish police are seeing an increase in 3D printed hand guns, with a recent spike in the city of Malmö. On two separate occasions in the past year, local authorities have seized 3D printed handguns in the Scania capital, the third largest city in Sweden.
3D printed gun found by Malmö police
One incident saw a gun uncovered during a city-wide criminal sweep. Police reported suspicions upon finding a home-made gun built almost entirely of plastic. Upon launching a special investigation, the gun was confirmed as having been 3D printed.
Reports say the hand-crafted gun was similar to a Czech submachine gun known as the Scorpion, but was of a different caliber. Certain parts were likely derived from other weapons, while the majority was 3D printed and in working condition.
In a separate search, police found another 3D printed firearm in a Malmö parking garage, police spokesperson Nils Norling told Skane, a Swedish television news program. Local law enforcement has not commented on whether the two weapons are related.
The weapons were seized in January and February, and have since been tested by the Swedish National Forensic Centre, the NFC. According to Malmö police chief Stefan Sintéus, engineers performed test firings of the weapons on six different occasions, and can confirm they are indeed in working order. The firearms therefore qualify as illegal weapons.
The Scorpion submachine gun (not 3D printed)
Both guns are reported to have been constructed the same way: disassembling a traditionally made gun, scanning the parts, and re-constructing them via a 3D printer, which are then assembled into a finished weapon.
The construction method presents a problem for police. Under Swedish law, the parts themselves are not illegal to possess; only after they are assembled into a working firearm are they in violation of the Arms Act.
Sintéus is intent on updating those terms, however. “It’s obvious that the aim is to put the pieces together into a weapon. The only thing missing is a gun barrel and a bolt, so I call for a discussion of the limits on when it [counts] as a crime,” he said. According to the Malmö police chief, 3D printers present countless possibilities for those who wish to manufacture their own weapons, and Sintéus is concerned that the legislation cannot keep up.
“It’s not possible to criminalize a 3D printer, but it is nevertheless true that we now have people in the criminal environment that [possess] these kinds of weapons,” he noted.
3D printed handguns such as this one are becoming increasingly common across Europe
The police's stance is that the 3D printed gun ought to be classified as an ordinary gun, but ultimately that will be up to the court to decide.
These may have been rare incidents within Malmö, but 3D printed guns are a growing trend globally. “We know that it’s more common in Europe,” Sintéus said.
Posted in 3D Printing Application
Maybe you also like:
- T-Bone Cape motion control board launches on Indiegogo
- New extruder could lower costs of 3D printing cellular structures for drug testing
- New Ninja Printer Plate for consumer 3D printing
- mUVe3D releases improved Marlin firmware for all 3D printers
- Zecotek plans HD 3D display for 3D printers
- Add a smart LCD controller to your Robo3D printer
- Maker Kase: a handy cabinet for 3D printers
- Heated bed for ABS printing with the Printrbot Simple XL
- Next gen all metal 3D printer extruder from Micron
- Pico all-metal hotend 100% funded in 48 hours, B3 announces Stretch Goal
- Create it REAL announces first 3D printing Real Time Processor
- A larger and more powerful 3D printer extruder on Kickstarter
Agreed arenegade. The picture shown is just a .22LR wrapped in custom ABS. This is no S&W .44 Magnum. 3D printed receivers, grips, etc. are one thing, but we're still a long way from economically printing metal parts, especially springs. That will be a wonderful day. Until then, the hoplophobes will just have to cower in fear that somewhere someone may have means of protecting themselves.
arenegade wrote at 5/23/2017 2:03:25 AM:
Ruger 10-22 .22 cal compared to a evo 3 s1 9mm?? seriously silly...