Aug 14, 2017 | By Benedict

PyroGenesis Canada, a Canadian plasma process specialist, says it is developing a new, plasma-based process for the production of metal 3D printing powders. PyroGenesis says the new process could have a greater market impact than its original Plasma Atomization technology.

Over the last few years, Canadian plasma process specialist PyroGenesis has gradually laid the foundations for its re-entry into metal powder production, citing the popularity of additive manufacturing as the primary reason for its return. In April 2016, the company announced it would be making a spinoff company to deal solely with additive manufacturing.

Excitingly, PyroGenesis now says it could have even more in store for the 3D printing industry than previously thought. In a press release put out today, the company’s President and CEO P. Peter Pascali explains what his company's new powder production system is all about, and how PyroGenesis intends to use it.

Essentially, the big news from PyroGenesis is that it will now be able to produce 3D printing powders for inkjet-style 3D printers, in addition to EBM and SLS 3D printers (to which the company already catered).

“PyroGenesis' Plasma Atomization technology already produces powders for EBM and Laser Sintering in optimal quality and quantities,” Pascali says. “To the best of our knowledge, only plasma technology can produce the high-quality powders required for these printers.”

Generally, customers with EBM and SLS 3D printers require powders in 15-106 micron range. But a recent turn of events led PyroGenesis to realize that certain fine powders it was also producing, 5-20 micron “MIM cut” powders, could be used for inkjet 3D printing. (Last year, printing giant HP entered the additive manufacturing market with its Jet Fusion 3D printer, contributing to the growing interest in inkjet-style 3D printing.)

PyroGenesis’ discovery could be likened to a coffee vendor suddenly realizing it can supply fine-ground beans to a huge market of espresso-favoring customers, in addition to its french press and drip coffee clientele.

“Ironically, until the interest by 3D inkjet type metal printers in smaller powder sizes, the MIM cut was considered an undesirable by-product of the Plasma Atomization technology, with most of the economic value residing in the other two cuts encompassing the 15-106 powder size distribution,” Pascali explains.

PyroGenesis President and CEO P. Peter Pascali

But after PyroGenesis realized that there could be a potentially large market for ultra-fine metal 3D printing powders, it hit the brakes on what it was doing and decided to make a radical left-turn.

“Several months ago…it became apparent to us that the appetite for this ultra-fine powder was significant,” Pascali says. “As a result, we decided to pause our ramp-up phase to make adjustments to our Plasma Atomization technology in order to try and shift the particle size distribution towards this low end of the spectrum.”

According to PyroGenesis, this shift towards finer powders has successful “beyond [its] expectations.” The new process allows the company to exercise significant control over the coarseness of its produced powders, allowing it to easily switch between powders for its three kinds of 3D printing customer: EBM, sintering, and now inkjet. Moreover, the process is actually cheaper than methods the company was previously pursuing.

Excitingly, Pascali and co say that this is just the beginning for PyroGenesis’ new powder production process, which could be improved to be significantly more cost-effective.

“Given our plasma expertise and our familiarity with the technology, we believe we have not even scraped the surface of what this new process can do with respect to production rates and powder quality,” Pascali says.

Part of those future plans include making Grade 23 MIM cut titanium powder, the highest-grade titanium powder available. At present, PyroGenesis says it is able to produce Grade 5 titanium powders using its new process, but has its sights set on Grade 23.

PyroGenesis’ previously announced ramp-up phase remains scheduled for completion between the end of September and beginning of October.

 

 

Posted in 3D Printing Materials

 

 

Maybe you also like:


   






Leave a comment:

Your Name:

 


Subscribe us to

3ders.org Feeds 3ders.org twitter 3ders.org facebook   

About 3Ders.org

3Ders.org provides the latest news about 3D printing technology and 3D printers. We are now seven years old and have around 1.5 million unique visitors per month.

News Archive