| Manufacturer | Model
| Assembled | Image | Build envelope
(W x D x H mm) | Nozzle diameter
(mm) | Layer thickness
(mm) | Speed
(mm/s) | Positioning precision | Input format | Software | System compatibility | Power supply | Weight
(kg) | | Sedgwick | 3D DLP Printer v2.0 | Yes |  | 75x75x50 | - | 0.1 | - | - | - | FlashPoint | - | - | - | | Robot Factory | 3DLPrinter | Yes |  | 102x78x160 | - | - | - | - | - | - | - | 230v 50Hz – 400 W approx (100 W + 300 W projector) | 40 | | Solidscape | 3Z Studio | Yes |  | 152x152x51 | - | - | - | - | - | Pronterface, ReplicatorG , Repetier | - | 90-250-v, 10A @ 230v max consumption | 34 | | Felix Printers | 3d Felix 3.0 Kit | DIY kit |  | 225x205x235 | 0.35 | 0.05 | - | 0.05mm | - | - | - | 110-240v | 7 | | 3ntr | A4 printer | Yes |  | 305x205x210 | 0.40 | 0.05 | - | X-Y 0.05~0.11mm Z 0.05mm | - | Repetier | - | 240 / 300 V | 32 | | Airwolf 3D | AW3 HDX | Yes |  | 300x200x300 | 0.35 | 0.25 | - | - | GCode | Repetier Firmware, Pronterface Print Controller, Slic3R GCode generator | Windows, Mac | 13.5V DC, 320W | 18 | | Airwolf 3D | AW3D HD | DIY kit |  | 300x200x300 | 0.35 | 0.25 | - | - | GCode | Repetier Firmware, Pronterface Print Controller, Slic3R GCode generator | Windows, Mac | 13.5V DC, 320W | 18 | | Active 3D | Active-X1 | DIY kit |  | 270x220x220 | - | 0.5 | - | - | - | - | - | - | - | | Afinia | Afinia H-Series | Yes |  | 140x140x135 | - | 0.2 | - | - | - | - | Windows XP, Vista, Win7, Mac OS 10.6 and above | - | - | | Hyrel 3D | Apprentice E3 | Yes |  | 200x200x200 | 0.35 | - | - | - | - | - | - | 115 / 230 V | - | | Omni3d | Architect | Yes |  | 310x410x310 | - | - | - | - | - | - | - | - | 14 | | Printrbot | Assembled Simple | Yes |  | 150x150x150 | 0.40 | 0.1 | - | - | - | - | - | - | 7 | | Plastic Scribbler | Asterid Model 1000S | Yes |  | 203x203x203 | 0.40 | - | - | - | - | - | - | 12V 10A 120W | - | | Autodesk | Autodesk 3D Printer | Yes |  | - | - | - | - | - | - | - | - | - | - | | Beeverycreative | BEETHEFIRST | Yes |  | 190x135x125 | - | - | - | - | - | BEESOFT | Windows ,Linux ,Mac | 200-230 VAC 2.0A 50-60 Hz | 10 | | Builder | Big Builder | Yes |  | 220x210x665 | - | 0.05 | - | - | - | - | - | 100 – 240 V / ~3A / 50 – 60 Hz | 25 | | Big Rep | BigRep ONE | Yes |  | 1147x1000x1188 | - | - | - | - | - | - | - | - | - | | Hot Proceed | Blade-1 | Yes |  | 100x100x100 | - | 0.2 | - | - | - | - | - | - | 5 | | Pirate 3D | Buccaneer 3D printer | Yes |  | 136x100x146 | 0.40 | 0.05 | - | - | - | - | - | 100 / 240 V | 8 | | York 3D Printers | Buildabot 'Revolution' 3d Printer - Fully Built | Yes |  | 210x210x160 | 0.35 | 0.2 | - | - | - | Printrun | Windows, Mac and Linux | 240v ATX 550W | 10 | | York 3D Printers | Buildabot 'Revolution' 3d Printer Kit | DIY kit | | 210x210x160 | 0.35 | 0.2 | - | - | - | Printrun | Windows, Mac and Linux | 240v ATX 550W | 10 | | 3D Stuffmaker | CREATOR Fully Assembled | Yes |  | 110x130x105 | 0.70 | 0.35 | - | - | - | - | Windows, MAC, Linux | - | 7 | | MaukCC | Cartesio M V0.9 | DIY kit |  | 200x200x200 | 0.50 | 0.5 | - | - | - | - | - | 120 / 240 V | 15 | | CraftUnique | CraftBot 3D Printer | Yes |  | 250x200x200 | 0.40 | - | - | - | - | - | - | - | - | | Flashforge | Creator | Yes | | 225X145X150 | 0.40 | 0.1 | - | 0.1 | - | - | - | 110-230V | 15 | | 3D Systems | Cube | Yes |  | 152x152x152 | - | 0.075 | - | - | - | - | - | - | 8 | | 3D Systems | Cube 2 | Yes |  | 140x140x140 | - | 0.2 | - | - | - | - | - | - | 4 | | 3D Systems | Cube 3 | Yes |  | 153x153x153 | - | 0.07 | - | - | - | - | - | - | 8 | | Cubify | Cube 3D printer | Yes |  | 140x140x140 | - | 0.25 | - | - | - | Cubify Client | Windows 7, Windows XP | - | 4 | | 3D Systems | CubeX | Yes |  | 275x265x240 | - | 0.1 | - | - | - | - | - | 110-240v AC | 36 | | Cubify | CubeX 3D printer | Yes |  | 275x265x240 | - | - | - | - | - | - | - | 110 -240V | 36 | | XYZprinting | DA VINCI 2.0 Duo | Yes |  | 150X200X200 | 0.40 | 0.1 | - | - | - | - | - | - | 25 | | Delta Tower | Delta Tower | Yes |  | 175x175x580 | 0.40 | 0.1 | - | 0.05 | - | Repetier Host | - | - | 22 | | WASP | DeltaWASP Clay Kit (available for DeltaWASP 2040, DeltaWASP 4070 and DeltaWASP 60100) | Yes |  | - | 1.00 | 0.5 | - | - | - | - | - | - | 15 | | COBOT | Desktop 3D Printer | Yes |  | 210x270x210 | - | 0.05 | - | - | - | - | - | 110/230V / 320W | - | | MindKits | DiamondMind 3D Printer V2 | DIY kit |  | 260x250x170 | 0.35 | 0.1 | - | - | - | Slic3r, Repetier | - | 5A, 12V, 60W | - | | Tinkerine Studio | Ditto Plus 3D printer | DIY kit |  | 210x185x230 | - | 0.1 | - | - | STL, OBJ | Coordia | Windows 7 | AC 110-220V, 50-60 Hz | 7 | | Tinkerine Studio | Ditto Plus 3D printer Assembled | Yes | | 210x185x230 | - | 0.1 | - | - | STL, OBJ | Coordia | Windows 7 | AC 110-220V, 50-60 Hz | 7 | | Tinkerine | Dittopro | Yes |  | 225x165x205 | 0.35 | 0.05 | - | - | STL,OBJ | Tinkerine Suite | Windows, Mac | AC110-220V,50-60 Hz | 7 | | 3D Systems | EKOCYCLE Cube | Yes |  | 152x152x152 | - | - | - | - | - | - | - | - | - | | 3D Stuffmaker | EVOLUTION Gen2 kit | DIY kit |  | 200x200x200 | 0.70 | 0.35 | - | - | - | - | Windows, MAC, Linux | - | 9 | | Eventorbot | Eventorbot 3D printer | DIY kit |  | 203x254x152 | - | - | - | - | - | - | - | - | - | | Multistation | Extru3D V2 | DIY kit |  | 275x205x210 | - | - | - | - | STL | - | - | 60W (12V @ 5A) | 17 | | Multistation | Extru3D V2 Assembled | Yes | | 275x205x210 | - | - | - | - | STL | - | - | 60W (12V @ 5A) | 17 | | Fablicator | Fablicator | Yes |  | 178x178x178 | - | 0.1 | - | - | STL | - | Windows 7 | - | - | | Omni3d | Factory 1.0 | Yes |  | 310x310x310 | 0.40 | - | - | - | - | - | - | - | 14 | | Natural Machines | Foodini | Yes |  | 250x165x120 | - | - | - | - | - | - | - | - | 10 | | Asiga | Freeform Pico | Yes |  | 40x30x75 | - | - | - | Pixel Size: 39 μm | STL, SLC | Asiga Composer | - | 110 ~ 240V | 11 | | Asiga | Freeform Pico Plus27 | Yes | | 35x21.8x75 | - | - | - | Pixel size 27 microns | STL, SLC | Asiga Composer | - | 110 ~ 240V | 11 | | Asiga | Freeform Pico Plus33 | Yes | | 43x27x75 | - | - | - | Pixel size 33 microns | STL, SLC | Asiga Composer | - | 110 ~ 240V | 11 | | Asiga | Freeform Pico Plus39 | Yes | | 50x31.2x75 | - | - | - | Pixel size 40 microns | STL, SLC | Asiga Composer | - | 110 ~ 240V | 11 | | inDimension3 | Glacier Peak - Dual Head Printer | Yes |  | 160x160x120 | 0.35 | 0.3 | - | - | - | - | - | 100 / 240 V | - | | inDimension3 | Glacier Steel - Dual Head Printer | Yes | | 300x300x400 | 0.35 | 0.3 | - | - | - | - | - | 100 / 240 V | - | | inDimension3 | Glacier Summit - Dual Head Printer | Yes |  | 400x400x500 | 0.35 | 1.75 | - | - | - | - | - | 100 / 240 V | - | | InDimension3 | Glacier Summit Plus | Yes |  | 406x406x457 | - | - | - | - | - | - | - | - | - | | Hardcotton | Hardcotton SLA 3D printer | Yes |  | 140x140x200 | - | - | - | - | - | - | - | - | - | | Hyrel 3D | Hobbyist E2 | Yes | | 200x200x200 | 0.35 | - | - | - | - | - | - | 115 / 230 V | - | | rdGizmo For You LTD | Ilios HD SLA 3D Printer Kit | DIY kit |  | 340x440x380 | - | 0.0125 | - | - | - | - | - | 350W, 24VDC/14.6A | - | | Essential Dynamics | Imagine 3D Printer | Yes |  | 229x229 | - | - | - | - | - | - | - | - | 11 | | Isis3D | Isis One - Dual Extruder | Yes |  | 300x300x225 | 0.35 | 0.3 | - | - | - | KISSlicer PRO, Slic3r | win, mac, linux | 100-240V | - | | Hyrel 3D | Journeyman E4 | Yes | | 200x200x200 | 0.35 | - | - | - | - | - | - | 115 / 230 V | - | | Kentstrapper | KENTSTRAPPER VOLTA BETA | Yes |  | 260x280x190 | 0.41 | 0.06 | - | 0.06 | - | Repetier Host | - | 220/230 VAC | 10 | | KAST | Kast3dp | Yes |  | 150x200 | - | - | - | - | - | - | - | - | - | | Blue Eagle Labs | Kossel Clear ABS Kit | DIY kit |  | 200x200x279 | 0.50 | - | - | - | - | - | - | - | - | | Blue Eagle Labs | Kossel Clear PLA Kit | DIY kit |  | 279x279x279 | 0.50 | - | - | - | - | - | - | - | - | | Matsuura Machinery | LUMEX Avance-25 | Yes |  | 250x250x180 | - | - | - | - | - | - | - | - | - | | Tinkerine Studio | Litto 3D printer | DIY kit |  | 135x120x175 | - | 0.1 | - | - | - | - | Windows 7 | AC 110-220V, 50-60 Hz | 6 | | Tinkerine Studio | Litto 3D printer Assembled | Yes | | 135x120x175 | - | 0.1 | - | - | - | - | Windows 7 | AC 110-220V, 50-60 Hz | 6 | | Mbot-3D | MBot Grid II | Yes |  | 250x220x190 | - | - | - | - | - | - | - | 100 / 240 V | 18 | | MENDEL MAX | Yes |  | 400x400x300 | 0.40 | 0.1 | - | - | - | Repetier Host | - | 220/230 VAC | 18 | | ORD solutions inc | MH3000 - 5 Color/Material 3D | Yes |  | 284x302x192 | 0.50 | - | - | - | - | - | - | 115/230V | 29 | | New Matter | MOD-t 3D printe | Yes |  | 150x100x125 | 0.40 | 0.03 | - | - | STL | - | - | 100-240 VAC, 50/60 Hz, 80 W | 5 | | MOTA | MOTA 3D Printe | Yes |  | 165x155x155 | - | 0.04 | - | - | - | - | - | - | - | | Makerbot | MakerBot Replicator 2 | Yes |  | 285x153x155 | 0.40 | 1.75 | - | 2.5 microns | .stl, .obj, .thing | ReplicatorG | Windows (XP/7), Ubuntu Linux (10.04+), Mac OS X (10.6+) | 100–240V | 12 | | Makex | Makex M-Ohe | Yes |  | 140x110x170 | - | 0.02 | - | - | - | - | - | - | - | | MarkForged | Mark One | Yes |  | 305x160x160 | - | 0.1 | - | - | - | Cloud Enabled | - | - | - | | MarkForged | Mark One Developer Kit | DIY kit |  | 305x160x160 | - | 0.1 | - | - | - | - | - | - | - | | Jelwek | Mark34 | DIY kit |  | 140x155x105 | - | - | - | - | - | - | - | 12v | - | | Mcor Technologies | Matrix 300+ | Yes |  | 256x169x150mm | - | 0.1 | - | 12µ | STL, OBJ | SliceIT | 64 bit Windows XP, Windows Vista, or Windows 7 | 350W, 240v 50Hz or 120v 60Hz | 150 | | Mcor Technologies | Mcor IRIS | Yes |  | 256x169x150mm | - | 0.1 | - | 12µ | STL, OBJ, VRML | SliceIT, ColourIT | 64 bit Windows XP, Windows Vista, or Windows 7 | 350W, 240v 50Hz or 120v 60Hz | 160 | | 3D Botic | MendelBot MM152 DIY Kit | DIY kit |  | - | - | - | - | - | - | - | - | 110V/220V | - | | MendelMax | MendelMax 2.0 Beta Kit | DIY kit |  | 245x315x225 | 0.40 | - | - | - | - | - | - | 110-220 VAC | - | | Mixshop | Mix G1 Plus Kit | DIY kit |  | 160x160x160 | 0.34 | - | - | - | - | - | - | 12v 200W | 8 | | Stratasys | Mojo | Yes |  | 127x127x127 | - | 0.178 | - | - | - | - | Windows | 220-240 VAC | 27 | | mostfun | MostFun Sail 3D | Yes |  | 120120120 | 0.40 | 0.1 | - | - | - | - | - | - | 8 | | Printrbot | New Simple Maker’s Kit | DIY kit | | 102x102x114 | 0.40 | 0.1 | - | - | - | - | - | 12v 6A | 4 | | QSQM Corporation | New Uncia | Yes |  | 102x77x180 | - | 0.1 | - | - | STL | Snapshot version 1.0 | - | 100-240V, 60HZ | 18 | | Old World Laboratories | OWL Nano | Yes |  | 150x150x200 | - | 0.0001 | - | - | - | Netfabb, Marlin Firmware | - | 1.4 A, 120 V | 20 | | Stratasys | Objet500 Connex3 | Yes |  | 490x390x200 | - | 0.016 | - | - | - | - | Windows 7 64-bit or Windows 8 64-bit | 110–240 VAC 50/60 Hz; 1.5 KW single phase | 430 | | Stratasys | Objet500 Connex3 | Yes | | 490x390x200 | - | 0.016 | - | - | - | - | Windows 7 64-bit or Windows 8 64-bit | 110–240 VAC 50/60 Hz; 1.5 KW single phase | 430 | | Pryntech | OpenSL v1.0 | DIY kit |  | 305x305x203 | - | - | - | - | - | - | - | - | 7 | | Mendel Parts | Orca v0.44 Unassembled | DIY kit |  | 250x220x190 | 0.35 | 0.1 | - | - | - | - | - | - | - | | envisionTEC | Perfactory Micro | Yes |  | 40x30x100 | - | - | - | - | - | - | - | 110V, 3 Amps Max, 220V, 2 Amps Max | 13 | | Piecemake | Piecemake | Yes |  | 178x178x178 | 0.35 | 0.1 | - | - | - | - | - | - | - | | Portabee | Portabee Go | Yes |  | 120x160x120 | 0.35 | 0.05 | - | - | - | - | - | - | - | | 3D Systems | ProJet 1200 | Yes |  | 43x27x150 | - | 0.03 | - | - | STL | - | - | - | 9 | | Mojreprap | Profabb GATE LE | Yes |  | 190x220x230 | - | - | - | - | - | - | - | - | - | | Mojreprap | Profabb GATE LE DIY Kit | DIY kit | | 190x220x230 | - | - | - | - | - | - | - | - | - | | Hyrel 3D | Professional E5 | DIY kit | | 200x200x200 | 0.35 | - | - | - | - | - | - | 115 / 230 V | - | | Makerfarm | Prusa 8 "i3v Kit | DIY kit |  | 203x203x203 | 0.35 | - | - | - | - | - | - | - | - | | eMotion Tech | Prusa Mendel I3 | DIY kit |  | - | 0.30 | 0.10 | - | - | - | - | - | 400W | - | | Mixshop | Prusa Mendel Kit | DIY kit |  | 195x195x140 | 0.34 | - | - | - | - | - | - | 12v200w | 8 | | NW RepRap | Prusa i3 Complete Kit | DIY kit |  | 190x190x190 | - | - | - | - | - | - | - | - | - | | Reprapsource | Prusa i3 Kit (5 years reprapsource edition) | DIY kit |  | - | - | 0.2 | - | - | - | - | - | 115 / 230 V | 14 | | Reprapsource | Prusa i3 Kit Single Frame Version | DIY kit |  | - | - | 0.2 | - | - | - | - | - | 115 / 230 V | 14 | | Omni3d | RapCraft 1.3 | Yes |  | 210x210x240 | 0.40 | - | - | - | - | - | - | - | 12 | | Omni3d | RapCraft 1.3 Kit | DIY kit | | 210x210x240 | 0.40 | - | - | - | - | - | - | - | 12 | | Stellamove | Rapy 3D Printer | Yes |  | 170x170x150 | 0.40 | - | - | - | - | - | - | - | 7 | | GADGETS3D | RepRap G3D | DIY kit |  | 200x200x200 | 0.40 | - | - | - | - | RepetierHost & Slic3r | - | - | - | | Kühling&Kühling | RepRap Industrial 3D printer | DIY kit |  | 200x200x200 | - | 0.1 | - | - | - | - | - | - | 30 | | Makerbot | Replicator | Yes |  | 203x254x152 | 0.40 | 0.1 | - | - | - | - | Windows 7+, Mac OS X 10, Linux | - | 16 | | Makerbot | Replicator Mini | Yes |  | 100x100x125 | - | - | - | - | - | - | - | - | - | | Makerbot | Replicator Z18 | Yes |  | 305x305x457 | - | 0.1 | - | - | - | - | - | - | - | | Invent Apart | RigidBot | DIY kit |  | 254x254x254 | - | 0.1 | - | - | - | - | - | 100-240v | - | | Invent Apart | RigidBot Big | Yes | | 300x400x254 | - | 0.1 | - | - | - | - | - | 100-240v | - | | RoBo 3D | RoBo 3D "ABS+PLA Model" Fully Assembled | Yes |  | 254x229x203 | 0.40 | 0.1 | - | - | - | ABS, PLA | - | 115-230v 12v | 12 | | Shark | Shark | Yes |  | 220x220x165 | 0.40 | 0.1 | - | - | - | Pronterface | win, mac, linux | 240 V, ~2A, 50 – 60Hz | - | | Solido | Solido SD300 Pro 3D Printer | Yes |  | 160x210x135 | - | 0.168 | - | - | - | - | Windows 2000, XP, Vista, Windows 7 | - | 44 | | Solidoodle | Solidoodle 3D Printer, 3nd Generation | Yes |  | 203x203x203 | 0.35 | - | - | - | STL | - | Windows, Mac, Linux | 120-240v | 5 | | Solidoodle | Solidoodle 4 | Yes |  | 203x203x203 | 0.40 | 0.1 | - | - | - | - | - | 100-240V | 8 | | Solidoodle | Solidoodle G4 | Yes |  | 203x203x203 | 0.40 | - | - | 0.1 | STL | - | Windows, Mac, Linux | 100V-240V | - | | Spiderbot | SpiderBot Eco Kit v1.2 | DIY kit |  | 180x180x180 | 0.50 | 0.100 | - | - | - | KISSlicer en RepetierHost | Windows XP, Vista | 110/220V | 15 | | Spiderbot | SpiderBot Full Kit v1.2 | DIY kit |  | 180x180x180 | 0.50 | 0.100 | - | - | - | KISSlicer nl RepetierHost | Windows XP, Vista | 110/220V | 15 | | Stalactite | Stalactite 102 | Yes |  | 102x77x180 | - | 0.25 | - | - | - | - | - | - | - | | Sumpod | Sumpod Aluminium | Yes |  | 240x240x150 | 0.40 | - | - | 0.02mm | - | all open source | - | - | - | | Sumpod | Sumpod Mega | Yes |  | 600x600x600 | 0.40 | 0.1 | - | 0.02 | - | - | - | - | - | | Hyrel 3D | System 30 | Yes |  | 225x200x200 | - | - | - | - | - | - | - | 115 / 230 V | - | | Formlabs | The Form 1 3D printer | Yes |  | 125x125x165 | - | 0.025 | - | - | STL | - | - | - | - | | Hyrel 3D | Tinkerer E1 | Yes | | 200x200x200 | 0.35 | - | - | - | - | - | - | 115 / 230 V | - | | kudo3D | Titan 1 DLP | Yes |  | 192x108x241 | - | - | - | - | - | - | - | - | - | | Trimaker | Trimaker element 3D | Yes |  | 200x200x180 | - | - | - | - | - | - | - | - | - | | TripodMaker | TripodMaker 3D printer | Yes |  | 300(diameter)x420 | 0.40 | 0.075 | - | - | - | - | - | - | - | | Marcha technology | Witbox Helios | Yes |  | 200x200x200 | 0.40 | - | - | - | - | - | - | 220V | - | | Marcha technology | Witbox Prusa | Yes | | 200x200x200 | 0.40 | - | - | - | - | - | - | 220V | - | | DWS Lab | XFab 3D Laser Printer | Yes |  | Ø180×180 | - | 0.1 | - | - | STL, SLC | XFAB Controller, Naut XFAB Edition | - | - | - | | Leapfrog | Xeed | Yes |  | 350x270x220 | - | 0.05 | - | - | - | - | - | 220v | 75 | | AIO Robotics | ZEUS All-In-One 3D Printer | Yes |  | 204x153x145 | 0.35 | 0.08 | - | - | PLY, STL, GCode | ZEUS OS | - | - | 21 | | IonCoreLtd | Zinter PRO 3D Printer | Yes |  | 200x200x200 | 0.40 | - | - | - | - | - | - | - | - | | Zion3D | Zion 16 | Yes |  | 394x394x406 | - | 0.1 | - | - | - | - | - | ATX | - | | Zion3D | Zion 8 | Yes |  | 203x203x203 | 0.50 | 0.1 | - | - | - | - | - | ATX | - | | Dreammaker | dreammaker | Yes |  | 200x200x200 | 4.00 | 0.05 | - | - | - | - | Window, mac, Linux | 220V, 50Hz | 12 | | Dreammaker | dreammaker max | Yes | | 200x200x200 | 0.40 | 0.05 | - | - | - | - | Window, mac, Linux | 220V, 50Hz | 25 | | Eckertech | ecksbot 2014 DIY kit | DIY kit |  | 200x200x135 | 0.45 | 0.05 | - | - | - | Repetier, Slic3r, Skeinforge | win, mac, linux | 110/220V | 10 | | Eckertech | ecksbot 2014 fully assembled | Yes | | 200x200x135 | 0.45 | 0.05 | - | - | - | Repetier, Slic3r, Skeinforge | win, mac, linux | 110/220V | 11 | | MakerDreams | iNvent One - Black | Yes |  | 280x210x200 | 0.30 | 0.1 | - | 0.11 | 100–240 V, ~2 AMPS, 50–60 HZ | - | - | - | 19 | | mUVe | mUVe 1 | DIY kit |  | 145x145x185 | - | - | - | 0.1 | - | - | - | 120v/240v AC | 17 | | mUVe | mUVe 1 DLP | DIY kit |  | 128X128X80 | - | - | - | - | - | - | - | 100-240VAC | 13 | | Stratasys | uPrint SE | Yes |  | 203x152x152 | - | 0.254 | - | - | - | - | Windows | 220–240 VAC | 76 | | Stratasys | uPrint SE Plus | Yes | | 203x203x152 | - | 0.254 | - | - | - | - | Windows | 220-240 VAC | 76 |
|
|
|
Home | About us | Advertise | Contact us / Submit tips | Disclaimer | Blog 