| Manufacturer | Model
| Assembled | Image | Build envelope
(W x D x H mm) | Nozzle diameter
(mm) | Layer thickness
(mm) | Speed
(mm/s) | Positioning precision | Input format | Software | System compatibility | Power supply | Weight
(kg) | | Solido | Solido SD300 Pro 3D Printer | Yes |  | 160x210x135 | - | 0.168 | - | - | - | - | Windows 2000, XP, Vista, Windows 7 | - | 44 | | Jelwek | Mark34 | DIY kit |  | 140x155x105 | - | - | - | - | - | - | - | 12v | - | | Robot Factory | 3DLPrinter | Yes |  | 102x78x160 | - | - | - | - | - | - | - | 230v 50Hz – 400 W approx (100 W + 300 W projector) | 40 | | B9Creations | B9Creator 3D printer KIT | DIY kit |  | 77x102x203 | - | - | 50 | X-Y 0.05~0.1mm Z 0.1mm | - | Basic | Windows, Mac and Linux | - | 14 | | envisionTEC | Perfactory Micro | Yes |  | 40x30x100 | - | - | - | - | - | - | - | 110V, 3 Amps Max, 220V, 2 Amps Max | 13 | | Sedgwick | 3D DLP Printer v2.0 | Yes |  | 75x75x50 | - | 0.1 | - | - | - | FlashPoint | - | - | - | | mUVe | mUVe 1 DLP | DIY kit |  | 128X128X80 | - | - | - | - | - | - | - | 100-240VAC | 13 | | Stalactite | Stalactite 102 | Yes |  | 102x77x180 | - | 0.25 | - | - | - | - | - | - | - | | QSQM Corporation | New Uncia | Yes |  | 102x77x180 | - | 0.1 | - | - | STL | Snapshot version 1.0 | - | 100-240V, 60HZ | 18 | | B9Creations | B9Creator 3D printer | Yes | | 77x102x203 | - | - | 50 | X-Y 0.05~0.1mm Z 0.1mm | - | - | Windows, Mac and Linux | - | 14 | | kudo3D | Titan 1 DLP | Yes |  | 192x108x241 | - | - | - | - | - | - | - | - | - | | Makex | Makex M-Ohe | Yes |  | 140x110x170 | - | 0.02 | - | - | - | - | - | - | - | | Stratasys | uPrint SE | Yes |  | 203x152x152 | - | 0.254 | - | - | - | - | Windows | 220–240 VAC | 76 | | Stratasys | uPrint SE Plus | Yes | | 203x203x152 | - | 0.254 | - | - | - | - | Windows | 220-240 VAC | 76 | | Kühling&Kühling | RepRap Industrial 3D printer | DIY kit |  | 200x200x200 | - | 0.1 | - | - | - | - | - | - | 30 | | 3D Systems | EKOCYCLE Cube | Yes |  | 152x152x152 | - | - | - | - | - | - | - | - | - | | Fablicator | Fablicator | Yes |  | 178x178x178 | - | 0.1 | - | - | STL | - | Windows 7 | - | - | | SeeMeCNC | ORION Delta 3D-printer | Yes |  | 152(d)x203 | - | 0.05 | 200 | - | - | - | - | - | - | | Multistation | Extru3D V2 | DIY kit |  | 275x205x210 | - | - | - | - | STL | - | - | 60W (12V @ 5A) | 17 | | NW RepRap | Prusa i3 Complete Kit | DIY kit |  | 190x190x190 | - | - | - | - | - | - | - | - | - | | Conrad | Velleman K8200 | DIY kit |  | 200x200x200 | - | - | 120 | - | - | - | - | - | 9 | | Essential Dynamics | Imagine 3D Printer | Yes |  | 229x229 | - | - | - | - | - | - | - | - | 11 | | Big Rep | BigRep ONE | Yes |  | 1147x1000x1188 | - | - | - | - | - | - | - | - | - | | Multistation | Extru3D V2 Assembled | Yes | | 275x205x210 | - | - | - | - | STL | - | - | 60W (12V @ 5A) | 17 | | Tinkerine Studio | Litto 3D printer Assembled | Yes |  | 135x120x175 | - | 0.1 | - | - | - | - | Windows 7 | AC 110-220V, 50-60 Hz | 6 | | zegorobotics | Zego Classic Assembly kit | DIY kit |  | 300(diameter)x230 | - | 0.07 | 200 | - | - | - | - | - | - | | Deezmaker | Bukito Portable Mini Printer Kit | DIY kit |  | 140x150x125 | - | - | 100 | - | - | - | - | - | 3 | | Deezmaker | Bukobot 8 v2 Kit X3 | DIY kit |  | 200x200x200 | - | - | 120 | - | - | - | - | - | - | | Deezmaker | Bukobot 8 v2 Duo Kit (Dual Extruders) | DIY kit |  | 200x200x200 | - | - | 120 | - | - | - | - | - | - | | Natural Machines | Foodini | Yes |  | 250x165x120 | - | - | - | - | - | - | - | - | 10 | | Invent Apart | RigidBot | DIY kit |  | 254x254x254 | - | 0.1 | - | - | - | - | - | 100-240v | - | | Invent Apart | RigidBot Big | Yes | | 300x400x254 | - | 0.1 | - | - | - | - | - | 100-240v | - | | Leapfrog | Xeed | Yes |  | 350x270x220 | - | 0.05 | - | - | - | - | - | 220v | 75 | | Afinia | Afinia H-Series | Yes |  | 140x140x135 | - | 0.2 | - | - | - | - | Windows XP, Vista, Win7, Mac OS 10.6 and above | - | - | | Zbot.cc | Zbot | Yes |  | 250x250x200 | - | 0.1 | 80 | X-axis, Y-axis, Z-axis + /-0.1mm | - | - | Windows XP, Windows 7 | VAC 50/60Hz 110V - 220V, 250W | 25 | | Tinkerine Studio | Litto 3D printer | DIY kit | | 135x120x175 | - | 0.1 | - | - | - | - | Windows 7 | AC 110-220V, 50-60 Hz | 6 | | Tinkerine Studio | Ditto Plus 3D printer Assembled | Yes |  | 210x185x230 | - | 0.1 | - | - | STL, OBJ | Coordia | Windows 7 | AC 110-220V, 50-60 Hz | 7 | | 3D Systems | CubeX | Yes |  | 275x265x240 | - | 0.1 | - | - | - | - | - | 110-240v AC | 36 | | botobjects | ProDesk 3D | Yes |  | 275x275x300 | - | - | 175 | 25 | - | - | - | 100 / 240 V | 18 | | ROKIT | 3DISON Plus | Yes |  | 225x145x150 | - | 0.05 | 40 | - | - | creator K | Windows, Macos x | 100 – 220V, 50/60 Hz | 15 | | Actuity Design | Acuity MendelMax 3D-printer | Yes |  | 200x140x200 | - | - | 120 | - | - | - | - | - | - | | Actuity Design | Helix – 3D Printer | Yes |  | 300x300x300 | - | - | 100 | - | - | - | - | 100 / 240 V | 29 | | ORD solutions inc | MH3000 - 3D Printer Fully assembled | Yes |  | 284x302x192 | - | - | 500 | - | - | - | - | - | 29 | | Omni3d | Architect | Yes |  | 310x410x310 | - | - | - | - | - | - | - | - | 14 | | Builder | Big Builder | Yes |  | 220x210x665 | - | 0.05 | - | - | - | - | - | 100 – 240 V / ~3A / 50 – 60 Hz | 25 | | Leapfrog | Creatr XL | Yes |  | 230x260x600 | - | 0.05 | 60 | - | - | - | - | 100-240 V | 37 | | 3D Systems | Cube 3 | Yes |  | 153x153x153 | - | 0.07 | - | - | - | - | - | - | 8 | | Zion3D | Zion 16 | Yes |  | 394x394x406 | - | 0.1 | - | - | - | - | - | ATX | - | | Mojreprap | Profabb GATE LE | Yes |  | 190x220x230 | - | - | - | - | - | - | - | - | - | | Mojreprap | Profabb GATE LE DIY Kit | DIY kit | | 190x220x230 | - | - | - | - | - | - | - | - | - | | Active 3D | Active-X1 | DIY kit |  | 270x220x220 | - | 0.5 | - | - | - | - | - | - | - | | Beeverycreative | BEETHEFIRST | Yes |  | 190x135x125 | - | - | - | - | - | BEESOFT | Windows ,Linux ,Mac | 200-230 VAC 2.0A 50-60 Hz | 10 | | 3D Botic | MendelBot MM152 DIY Kit | DIY kit |  | - | - | - | - | - | - | - | - | 110V/220V | - | | XYZprinting | XYZprinting da Vinci 1.0 | Yes |  | 200x200x200 | - | 0.04 | 150 | - | STL, XYZ | - | - | - | 24 | | Stratasys | Mojo | Yes |  | 127x127x127 | - | 0.178 | - | - | - | - | Windows | 220-240 VAC | 27 | | Hyrel 3D | System 30 | Yes |  | 225x200x200 | - | - | - | - | - | - | - | 115 / 230 V | - | | MarkForged | Mark One Developer Kit | DIY kit |  | 305x160x160 | - | 0.1 | - | - | - | - | - | - | - | | Mbot-3D | MBot Grid II | Yes |  | 250x220x190 | - | - | - | - | - | - | - | 100 / 240 V | 18 | | Makerbot | Replicator Mini | Yes |  | 100x100x125 | - | - | - | - | - | - | - | - | - | | Makerbot | Replicator Z18 | Yes |  | 305x305x457 | - | 0.1 | - | - | - | - | - | - | - | | MOTA | MOTA 3D Printe | Yes |  | 165x155x155 | - | 0.04 | - | - | - | - | - | - | - | | InDimension3 | Glacier Summit Plus | Yes |  | 406x406x457 | - | - | - | - | - | - | - | - | - | | Eventorbot | Eventorbot 3D printer | DIY kit |  | 203x254x152 | - | - | - | - | - | - | - | - | - | | Reprapsource | Prusa i3 Kit (5 years reprapsource edition) | DIY kit |  | - | - | 0.2 | - | - | - | - | - | 115 / 230 V | 14 | | SeeMeCNC | Rostock MAX v2 3D Printer Kit | DIY kit |  | 279x279x349 | - | - | 300 | 20 microns | - | - | - | - | - | | ZMorph | ZMorph3d | Yes |  | 235x230x165 | - | - | 500 | - | - | - | - | - | - | | COBOT | Desktop 3D Printer | Yes |  | 210x270x210 | - | 0.05 | - | - | - | - | - | 110/230V / 320W | - | | RepRapPro | Ormerod Kit 2 | DIY kit |  | 200x200x200 | - | 0.1 | 30 | 0.0125mm | STL | - | - | 240v | 6 | | Reprapsource | Prusa i3 Kit Single Frame Version | DIY kit |  | - | - | 0.2 | - | - | - | - | - | 115 / 230 V | 14 | | Cubify | CubeX 3D printer | Yes |  | 275x265x240 | - | - | - | - | - | - | - | 110 -240V | 36 | | Trimaker | Trimaker element 3D | Yes |  | 200x200x180 | - | - | - | - | - | - | - | - | - | | 3D Systems | Cube 2 | Yes |  | 140x140x140 | - | 0.2 | - | - | - | - | - | - | 4 | | Tinkerine Studio | Ditto Plus 3D printer | DIY kit | | 210x185x230 | - | 0.1 | - | - | STL, OBJ | Coordia | Windows 7 | AC 110-220V, 50-60 Hz | 7 | | Hot Proceed | Blade-1 | Yes |  | 100x100x100 | - | 0.2 | - | - | - | - | - | - | 5 | | MarkForged | Mark One | Yes |  | 305x160x160 | - | 0.1 | - | - | - | Cloud Enabled | - | - | - | | DWS Lab | XFab 3D Laser Printer | Yes |  | Ø180×180 | - | 0.1 | - | - | STL, SLC | XFAB Controller, Naut XFAB Edition | - | - | - | | 3D Systems | Cube | Yes |  | 152x152x152 | - | 0.075 | - | - | - | - | - | - | 8 | | 3D Systems | CubePro | Yes |  | 273x273x241 | - | 0.075 | 15 | - | - | - | Windows XP, 7, Mac OSX 10.8 | 100-240v AC | 36 | | Cubify | Cube 3D printer | Yes |  | 140x140x140 | - | 0.25 | - | - | - | Cubify Client | Windows 7, Windows XP | - | 4 | | Mcor Technologies | Mcor IRIS | Yes |  | 256x169x150mm | - | 0.1 | - | 12µ | STL, OBJ, VRML | SliceIT, ColourIT | 64 bit Windows XP, Windows Vista, or Windows 7 | 350W, 240v 50Hz or 120v 60Hz | 160 | | Mcor Technologies | Matrix 300+ | Yes |  | 256x169x150mm | - | 0.1 | - | 12µ | STL, OBJ | SliceIT | 64 bit Windows XP, Windows Vista, or Windows 7 | 350W, 240v 50Hz or 120v 60Hz | 150 | | KAST | Kast3dp | Yes |  | 150x200 | - | - | - | - | - | - | - | - | - | | rdGizmo For You LTD | Ilios HD SLA 3D Printer Kit | DIY kit |  | 340x440x380 | - | 0.0125 | - | - | - | - | - | 350W, 24VDC/14.6A | - | | Formlabs | The Form 1 3D printer | Yes |  | 125x125x165 | - | 0.025 | - | - | STL | - | - | - | - | | Rays Opitcs | MiiCraft 3D printer | Yes |  | 43x27x180 | - | 0.05 | 55 | - | STL | Open source Python software | Windows XP and Win7 | 100VAC ~ 240VAC | 7 | | 3D Systems | ProJet 1200 | Yes |  | 43x27x150 | - | 0.03 | - | - | STL | - | - | - | 9 | | mUVe 3D LLC | mUVe 1 3D Printer Classic | DIY kit |  | 145x145x185 | - | - | 360 | - | - | - | - | 120 / 240 V | 10 | | Pryntech | OpenSL v1.0 | DIY kit |  | 305x305x203 | - | - | - | - | - | - | - | - | 7 | | mUVe | mUVe 1 | DIY kit |  | 145x145x185 | - | - | - | 0.1 | - | - | - | 120v/240v AC | 17 | | Hardcotton | Hardcotton SLA 3D printer | Yes |  | 140x140x200 | - | - | - | - | - | - | - | - | - | | Autodesk | Autodesk 3D Printer | Yes |  | - | - | - | - | - | - | - | - | - | - | | Old World Laboratories | OWL Nano | Yes |  | 150x150x200 | - | 0.0001 | - | - | - | Netfabb, Marlin Firmware | - | 1.4 A, 120 V | 20 | | Matsuura Machinery | LUMEX Avance-25 | Yes |  | 250x250x180 | - | - | - | - | - | - | - | - | - | | Blue Printer | SHS 3D Printer | Yes |  | 160x200x140 | - | 0.1 | 170 | - | STL | - | Windows, Mac and Linux | - | - | | Asiga | Freeform Pico | Yes |  | 40x30x75 | - | - | - | Pixel Size: 39 μm | STL, SLC | Asiga Composer | - | 110 ~ 240V | 11 | | Asiga | Freeform Pico Plus27 | Yes | | 35x21.8x75 | - | - | - | Pixel size 27 microns | STL, SLC | Asiga Composer | - | 110 ~ 240V | 11 | | Asiga | Freeform Pico Plus33 | Yes | | 43x27x75 | - | - | - | Pixel size 33 microns | STL, SLC | Asiga Composer | - | 110 ~ 240V | 11 | | Asiga | Freeform Pico Plus39 | Yes | | 50x31.2x75 | - | - | - | Pixel size 40 microns | STL, SLC | Asiga Composer | - | 110 ~ 240V | 11 | | Solidscape | 3Z Studio | Yes |  | 152x152x51 | - | - | - | - | - | Pronterface, ReplicatorG , Repetier | - | 90-250-v, 10A @ 230v max consumption | 34 | | Stratasys | Objet500 Connex3 | Yes |  | 490x390x200 | - | 0.016 | - | - | - | - | Windows 7 64-bit or Windows 8 64-bit | 110–240 VAC 50/60 Hz; 1.5 KW single phase | 430 | | Stratasys | Objet500 Connex3 | Yes | | 490x390x200 | - | 0.016 | - | - | - | - | Windows 7 64-bit or Windows 8 64-bit | 110–240 VAC 50/60 Hz; 1.5 KW single phase | 430 |
|
|
|
Home | About us | Advertise | Contact us / Submit tips | Disclaimer | Blog 