| Manufacturer | Model
| Assembled | Image | Build envelope
(W x D x H mm) | Nozzle diameter
(mm) | Layer thickness
(mm) | Speed
(mm/s) | Positioning precision | Input format | Software | System compatibility | Power supply | Weight
(kg) |
| Makible | A6 LT no heat bed | DIY kit |  | 150x110x90 | 0.40 | 0.1 | 60 | 0.04 | Gcode | 5DPrint (own software), Pronterface, RepetierHost, Octoprint | Sprinter | 12V 60W (or higher) 110-240V AC power | 4 |
| Printrbot | Printrbot Simple | DIY kit |  | - | - | 0.1 | - | - | - | - | - | 12v 6A | 2 |
| Makible | A6 HT Acrylic with heat bed | DIY kit | | 150x110x90 | 0.40 | 0.1 | 60 | 0.04 | Gcode | 5DPrint (own software), Pronterface, RepetierHost, Octoprint | Sprinter | 12V 120W (or higher) 110-240V AC power supply | 4 |
| Makible | A6 HT Stainless | DIY kit |  | 150x110x90 | 0.40 | 0.1 | 60 | 0.04 | Gcode | 5DPrint (own software), Pronterface, RepetierHost, Octoprint | Sprinter | 12V 120W (or higher) 110-240V AC power supply | 4 |
| Printrbot | Printrbot jr | DIY kit |  | 114x140x102 | - | - | - | - | - | - | - | - | 3 |
| Mixshop | Prusa Mendel Full Kit (Excluding Printed Plastic Parts) | DIY kit |  | 200x200x140 | 0.34 | - | - | - | - | - | - | - | 8 |
| Mixshop | Mix G1 Full Kit (Including all the parts) | DIY kit |  | 170x150x170 | 0.34 | - | - | - | - | - | - | 12v 200W | 7 |
| Portabee | Portabee 3D printer kit (unassembled) | DIY kit |  | 120x120x120 | 0.50 | 0.2 | 43 | 0.1 | STL, GCode | Pronterface etc. | Reprap/Marlin | 12V10A Portable AC Adapter | 3 |
| RepRap France - eMotion Tech | Prusa Mendel V2 complete kit excluding plastic parts | DIY kit |  | 220x220 | 0.50 | - | - | - | - | - | - | - | - |
| Printrbot | Printrbot LC | DIY kit |  | 152x152x152 | - | - | - | - | - | - | - | - | - |
| Robo 3D | RoBo 3D "PLA only" Non-Assembled DIY kit | DIY kit |  | 254x254x203 | 0.40 | 0.1 | - | - | - | - | - | 100-240v, 12v DC@30 AMPS | - |
| Eventorbot | Eventorbot 3D printer | DIY kit |  | 203x254x152 | - | - | - | - | - | - | - | - | - |
| Romscraj | Durbie Prusa Mendel Reprap Complete Kit | DIY kit |  | 200x200x140 | - | - | - | - | - | - | - | - | - |
| RepRapPro | Complete RepRapPro Huxley Kit | DIY kit |  | 140x140x110 | - | - | 30 | 0.0125mm | STL | - | - | - | - |
| RepRap France - eMotion Tech | Prusa Mendel V2 complete kit including plastic parts | DIY kit | | 220x220 | 0.50 | - | - | - | - | - | - | - | - |
| Makemendel | Orca v0.40 Kit with Linear Bearings (Unassembled) | DIY kit |  | 220x220x165 | - | - | - | - | - | - | - | 100-240V | - |
| Makemendel | RapidBot 1.0 Kit | DIY kit |  | 220x220x165 | 0.35 | 0.2 | 60 | 27 microns | STL | Pronterface | Windows 7, Vista | ATX, 450W | 12 |
| Printrbot | Printrbot PLUS | DIY kit |  | 203x203x203 | - | - | - | - | - | - | - | - | - |
| Makemendel | RapidBot 3.0 Kit | DIY kit |  | 220x220x165 | 0.35 | 0.2 | 60 | 27 microns | STL | Pronterface | Windows 7, Vista | ATX, 450W | 12 |
| Makemendel | Mendel Kit (Unassembled and Excluding printed plastic parts) | DIY kit |  | 200x200x140 | - | - | - | - | - | - | - | 110-240V | - |
| Makemendel | RapidBot 2.0 Kit | DIY kit |  | 220x220x165 | 0.35 | 0.2 | 60 | 27 microns | STL | Pronterface | Windows 7, Vista | ATX, 450W | 12 |
| RepRapPro | RepRapPro Mono Mendel | DIY kit |  | 210x190x140 | - | 0.1 | 30 | 0.0125mm | STL | - | - | - | - |
| NW RepRap | Prusa Mendel Iteration 2 Complete Kit | DIY kit |  | - | - | - | - | - | - | - | - | - | - |
| Ultra-Bot | Ultra-Bot 3D printer | DIY kit |  | 127x165x191 | 0.50 | 0.38 | - | - | - | - | - | - | - |
| Makergear | Prusa Mendel | DIY kit |  | 203x203x203 | - | - | - | - | - | - | - | - | - |
| Backho (White Tiger) company | Willybot 1.3 | DIY kit |  | - | 0.40 | 0.35 | 150 | - | STL, GCode | cura 13.03(Korean and English version),printrun,slic3r | Windows & Mac, Linux | 400W | 10 |
| Deezmaker | Bukobot Mini "Green" | DIY kit |  | 125x125x125 | - | - | 100 | - | - | - | - | - | - |
| German RepRap | GRRF PRotos Complete Kit | DIY kit |  | 225x225x140 | 0.50 | 0.1 | 100 | 0.1 | STL, GCode | Repetier Host, Sli3r | Repetier/Reprap/Marlin | 115 / 230 V | 10 |
| Tantillus | Tantillus 3D printer | DIY kit |  | 100x100x100 | 0.35 | - | - | - | - | - | - | - | - |
| Store Open Electronics | 3Drag 3D printer | DIY kit |  | 200x200x200 | 0.50 | - | 120 | X and Y: 0.015 mm; - Z: 0.781 microns | - | - | - | - | 9 |
| Ac123Dc | Mendel Prusa kit without plastic parts | DIY kit |  | 200x200x200 | - | - | - | - | - | - | - | - | 5 |
| Sharebot | ShareBot K 3D Printer Kit | DIY kit |  | 200x 200 x200 | 0.48 | 0.35 | 60 | - | STL, gcode | Control via PrintRun slic3r | Linux, Windows and OSX | - | - |
| Tinkerine Studio | Litto 3D printer | DIY kit |  | 135x120x175 | - | 0.1 | - | - | - | - | Windows 7 | AC 110-220V, 50-60 Hz | 6 |
| SeeMeCNC | Rostock MAX Complete 3D Printer Kit | DIY kit |  | 279x279x349 | - | - | 300 | 20 microns | - | - | - | - | - |
| Mendel Parts | Orca v0.43 Unassembled | DIY kit |  | 250x220x190 | - | - | - | - | - | - | - | - | - |
| Felix Printers | Felix 1.0 Complete Kit | DIY kit |  | 260x200x200 | 0.35 | - | - | 0.05mm | - | - | - | 12V 250W | 7 |
| RepRapPro | RepRapPro Tricolour Mendel | DIY kit |  | 210x190x140 | - | 0.1 | 30 | 0.0125mm | STL | - | - | - | - |
| BatBot | BatBot 3D printer | DIY kit |  | 180x180x210 | 0.28 | 0.2 | - | - | STL, GCode | Pronterface | - | 12V | - |
| Ac123Dc | Mendel Prusa full kit with assembled electronics LM8uu | DIY kit | | 200x200x200 | - | - | - | - | - | - | - | - | 5 |
| Deezmaker | Bukobot 8 Vanilla 3D Printer kit | DIY kit |  | 200x200x200 | - | - | 120 | - | - | - | - | - | - |
| Tinkerine Studio | Ditto Plus 3D printer | DIY kit |  | 210x185x230 | - | 0.1 | - | - | STL, OBJ | Coordia | Windows 7 | AC 110-220V, 50-60 Hz | 7 |
| Makemendel | RapidBot Mega | DIY kit |  | 750x250x200 | 0.40 | 0.1 | 60 | 27 microns | STL | Pronterface | Windows7, Vista | ATX, 450W | 25 |
| Airwolf 3D | AW3D V.5 | DIY kit |  | 200x200x150 | 0.35 | 0.25 | - | - | GCode | Repetier Firmware, Pronterface Print Controller, Slic3R GCode generator | Windows/Mac | 12V DC, 300W, 25A | 8 |
| ReprapSource | Shapercube 2.1 | DIY kit |  | 190x190x180 | - | - | - | - | - | - | - | 12V | 16 |
| Bits from Bytes | RapMan 3.2 3D Printer Kit Extreme (NBHE) | DIY kit |  | 270x205x210 | - | 0.13 | 15 | - | - | - | - | 5A @ 12V | 17 |
| Makergear | M2 | DIY kit |  | 203x254x203 | - | - | - | - | - | - | - | - | 11 |
| MendelMax | MendelMax 2.0 Beta Kit | DIY kit |  | 245x315x225 | 0.40 | - | - | - | - | - | - | 110-220 VAC | - |
| Deezmaker | Bukobot 8 Duo (Dual Extruder) | DIY kit |  | 200x200x200 | - | - | 120 | - | - | - | - | - | - |
| Printrbot | Printrbot GO | DIY kit |  | 200x185x150 | - | - | - | - | - | - | - | - | 7 |
| Bits from Bytes | RapMan 3.2 3D Printer Kit Universal (BHE-NS) | DIY kit | | 270x205x210 | - | 0.13 | 15 | - | - | - | - | 5A @ 12V | 17 |
| Ultimaker | Complete Ultimaker Kit | DIY kit |  | 210x210x220 | 0.40 | 0.25 | 400 | Positioning better than < 0.05 mm (1/16th micro stepping) | STL | ReplicatorG | Windows, Mac, Linux | 110-240V | 9 |
| A1 Technologies | Maxit | DIY kit |  | 210x160x100 | 0.50 | 0.4 | 70 | - | STL | Skeinforge with Repetier front end | With all 3D CAD files | 110 x 220VAC | 3 |
| York 3D Printers | Buildabot 'Revolution' 3d Printer Kit | DIY kit |  | 210x210x160 | 0.35 | 0.2 | - | - | - | Printrun | Windows, Mac and Linux | 240v ATX 550W | 10 |
| Multistation | Extru3D V2 | DIY kit |  | 275x205x210 | - | - | - | - | STL | - | - | 60W (12V @ 5A) | 17 |
| Fabbster | Fabbster kit | DIY kit |  | 230x230x210 | 0.40 | 0.25 | 400 | 0.100mm | - | - | - | 110V-240V | - |
| Metamáquina | Metamáquina 2 | DIY kit |  | 200x200x150 | 0.35 | - | 80 | 0.1 mm (X, Y): 0.05 mm (Z) | - | - | - | - | 9 |
| Airwolf 3D | AW3D XL | DIY kit |  | 300x200x178 | 0.50 | 0.25 | 150 | 0.04 | GCode | Repetier Firmware, Pronterface Print Controller, Slic3R GCode generator | Windows/Mac | 12V DC, 360W, 30A | 11 |
| Bits from Bytes | RapMan 3.2 3D Printer Kit Ultimate (DH-NS) | DIY kit | | 270x205x210 | - | 0.13 | 15 | - | - | - | - | 5A @ 12V | 17 |
| CB-Printer | 3D Printer CB-printer KIT | DIY kit |  | 200x200x180 | 0.20 | 0.1 | 50 | - | - | - | Windows / MAC / Linux | - | 8 |
| Bits from Bytes | RapMan 3.2 3D Printer Kit Education | DIY kit | | 270x205x210 | - | 0.13 | 15 | - | - | - | - | 5A @ 12V | 17 |
| MaukCC | CartesioM V0.7 | DIY kit |  | 200x200x200 | - | - | - | - | - | - | - | 120/240V | 13 |
| MaukCC | CartesioLD V0.6 | DIY kit |  | 200x400x200 | 0.50 | - | 100 | - | - | Marlin, Slic3r, pronterface | - | - | 17 |
| German RepRap | X400 | DIY kit |  | 400x400x350 | 0.50 | 0.1 | 50 | 0.1 | STL, GCode | Repetier Host, Sli3r etc. | Repetier/Reprap/Marlin | 115 / 230 V | 35 |
| B9Creations | B9Creator 3D printer KIT | DIY kit |  | 77x102x203 | - | - | 0 | X-Y 0.05~0.1mm Z 0.1mm | - | Basic | Windows, Mac and Linux | - | 14 |
| Open Source Romote Control | Ilios HD SLA 3D Printer Kit | DIY kit |  | 300x300x200 | - | 0.0125 | - | - | - | - | - | 350W, 24VDC/14.6A | - |
| Kühling&Kühling | RepRap Industrial 3D printer | DIY kit |  | 200x200x200 | - | 0.1 | - | - | - | - | - | - | 30 |
