Researchers have developed a new method of printing 3D cartilage that could eventually be implanted into injured patients to help re-grow cartilage in specific areas, such as the joints.
The novel hybrid printer is a combination of two low-cost fabrication techniques: a traditional ink jet printer and an electrospinning machine. Combining these systems allowed the scientists to build a structure made from natural and synthetic materials. Synthetic materials ensure the strength of the construct and natural gel materials provide an environment that promotes cell growth.
In this study, the hybrid system produced cartilage constructs with increased mechanical stability compared to those created by an ink jet printer using gel material alone. The constructs were also shown to maintain their functional characteristics in the laboratory and a real-life system.
The key to this was the use of the electrospinning machine, which uses an electrical current to generate very fine fibres from a polymer solution. Electrospinning allows the composition of polymers to be easily controlled and therefore produces porous structures that encourage cells to integrate into surrounding tissue.
"This is a proof of concept study and illustrates that a combination of materials and fabrication methods generates durable implantable constructs," said James Yoo, M.D., Ph.D., Professor at the Wake Forest Institute for Regenerative Medicine, and an author on the study. "Other methods of fabrication, such as robotic systems, are currently being developed to further improve the production of implantable tissue constructs."
In this study, flexible mats of electrospun synthetic polymer were combined, layer-by-layer, with a solution of cartilage cells from a rabbit ear that were deposited using the traditional ink jet printer. The constructs were square with a 10cm diagonal and a 0.4mm thickness.
The researchers tested their strength by loading them with variable weights and, after one week, tested to see if the cartilage cells were still alive.
The constructs were also inserted into mice for two, four and eight weeks to see how they performed in a real life system. After eight weeks of implantation, the constructs appeared to have developed the structures and properties that are typical of elastic cartilage, demonstrating their potential for insertion into a patient.
The researchers state that in a future scenario, cartilage constructs could be clinically applied by using an MRI scan of a body part, such as the knee, as a blueprint for creating a matching construct. A careful selection of scaffold material for each patient's construct would allow the implant to withstand mechanical forces while encouraging new cartilage to organise and fill the defect.
The printer has been presented on 22 November, in IOP Publishing's journal Biofabrication.
Posted in 3D Printing Technology
Maybe you also like:
- Inhaler for Children with Asthma wins 3D Printing Event Challenge 2012
- Custom-built 3D printer to transform waste plastic into composting toilets
- 3D Systems 3rd-qtr beats estimates as 3D printer sales soar
- Join EFF's Efforts to fight bad patents restricting 3D printing
- The art of 3D print failure
- Keep your earbuds in your ears with 3D printed button
- Printcraft: convert your Minecraft creations into STL 3D model files
- 3D printed protein model gives hands-on help for learning the secrets of molecules
- 3D Printer CB-printer launched at the 3D Print show in London
- Designer Janne Kyttanen launched 3D printed Macedonia case for iPad
- Making a plastic filament extruder
- Would you eat food made by a 3D printer?
- A preview image of Rostock mini 3D printer
- UK Government to invest ￡7M in 3D printing technology
- Glasgow unveiled world's most advanced 3D model of the human foot
- Unfold's Stratigraphic Manufactury: playing with ceramic 3d printing for unexpected results