Mar 31, 2016 | By Tess
As the 3D printing industry grows and the technology is gradually used in more and more types of production, the quest for developing new and innovative 3D printing materials becomes increasingly important. In following with this, American growth partnership company Frost & Sullivan has found that companies that supply materials must continue to move from a product-based approach to an end-industry based approach. In other words, rather than adopt a “one-material-fits all” strategy, 3D printing material suppliers should begin to focus on developing application-based material products.
In a press release published earlier today, Frost & Sullivan lays out how important 3D printing materials are to realizing 3D printing technology’s full potential, as well as how the materials industry can begin to put its focus towards this. As it points out, some superior 3D printing materials have been developed, such as polyetherimide (PEI), polyaryletherketone (PAEK), a semi-crystalline thermoplastic, carbon-fiber reinforced grades, and a number of high performance metal powders, but more material development and innovation are needed for optimizing 3D printing manufacturing capabilities.
At the center of this discussion are both the chemicals market and chemical manufacturers who supply raw materials. As Frost & Sullivan's Visionary Science Industry Manager Deepak Karthikeyan explains, “While opportunities are expanding, the chemicals market is held back to some extent because most chemical manufacturers supplying raw materials and formulations do not have a dedicated supply strategy in place for the 3D printing market. This can be attributed to the low volumes in the market and the relatively huge investments the suppliers need to make.”
Moreover, even though current volumes for 3D printing materials are low, a high demand does exist for technical support from both system manufacturers and users. This disparity, rather unfortunately, has translated into high costs for raw materials. As the press release continues, “To mitigate the price and raw material challenges, solution suppliers have to scout for possible acquisition opportunities based on the product portfolio and market expertise.”
Currently, and as one can well imagine, the demand for certain types of 3D printing materials such as plastic filaments and powders is quite high and rising as both are used on an industrial level, often for prototyping, and on a consumer scale with FFF and SLA 3D printing technologies. In terms of metal 3D printing, the demand for metal powders is also gradually rising, as sectors such as the aerospace, automotive, and health care industries are increasingly reliant on electron beam melting (EBM) and direct metal laser sintering (DMLS) to manufacture not only prototypes but also end-products.
"With concepts such as smart factories and digital manufacturing picking up pace 3D printing is expected to gain further traction across various end-user industries pushing the envelope for higher performance materials," says Karthikeyan. "Solution suppliers that provide a holistic solution to end users will dominate the market due to their proximity to the end user and comprehensive understanding of market challenges.”
Founded in 1961 in Mountain View, California, Frost & Sullivan has since expanded its consulting services into over 40 countries, offering market research, growth strategy, and corporate training services to its clients in a variety of different industries.
Posted in 3D Printing Materials
Maybe you also like:
- Zortrax celebrates 350% increase in filament sales, offers free 3D printer with 56x filament order
- 3D printing gases market worth 45.12 million USD by 2020
- ProtoParadigm unveils $5 PLA filament thanks to cost-effective 3D printed spool
- PolyMaker's PC-Plus filament strong enough to lift 240 kg, now available without BuildTak
- Stratasys ESD PEKK 3D printing thermoplastic prevents electrostatic discharge on satellites
- Airwolf 3D introduces new 3D printing nylon adhesive, Wolfbite NITRO
- Tethon 3D releases Porcelite ceramic 3D printing resin for SLA, DLP 3D printers
- 3Dom USA releases new bio-based 3D printing filament made from hemp
- Take a Sneak Peek at Revolutionary Sculptable 3D printing filament by Adam Beane
- Toray develops first ever PPS resin particles for powder bed fusion 3D printing
- Graphene 3D launches magnetic filament for functional 3D printing
In the last 5 years it is humanly impossible for one human being to have dedicated more time than me to the study and research of 3D Printing. IT COULD NOT HAVE BEEN DONE. NOT EVEN CLOSE. I am here to attest that the 3D Printing market is dying. There are less and less opportunities for first timers and startups and more and more of the industry is being gobbled up by the behemoth CORPORATIONS. HP, GOOGLE, GE, AUTODESK !!! 3D Printing is a lie !!