Jun.13, 2012
Belgian Design Studio Unfold started extruding ceramic materials with a RepRap one year ago. In their recently post they gave an overview of some of the stuff they have been printing in porcelain.
If you look at the carafe & cups pictured above it is difficult to believe all these were printed on an open source RepRap, Rapman 3D printer from Bits From Bytes.
Based on Makerbot's Frostruder MK2, Unfold built Claystruder 1.0 for RapMan, a printhead used for printing earthenware and porcelain ceramic objects.
"Instead of a mechanical plunger, you use timed pulses of air pressure to drive the material out of the syringe hence in the industry this is called a Time-Pressure Valve. The only difference with the frostruder apart from the physical design is that we use one double action 3/2 solenoid valve instead of two 2/2 single action ones. The 3/2 valve will pressurize when powered and automatically depressurize when power is removed. Its cheaper and requires only one controller output to operate. The double 2/2 gives possibly a greater flexibility in pressure timing. "
Unfold has also been working on developing custom software to convert the design file, in their case the Gcode Stacker. "It takes SVG vector files as input and spits out Gcode. Every SVG layer is a Gcode layer. This gives finer control over machine paths and enables you to do stuff impossible in 3d>Gcode toolchains like for example intersecting lines."
The ceramics 3D printer offers possibilities to produce fine layers and new forms that traditional pottery techniques hardly can make.
These general principles of designing a ceramics 3D printer should be easily adaptable to Mendel or other machines. If you want to test on your own RepRap and build such a printhead for 3D ceramic printing follow the instructions here. But before you start your exploration you might like to read a post about all sorts of clay for 3D printing, written by ceramic artist Jonathan Keep for Unfold blog.
In the video below, Unfold created a virtual pottery wheel which gives visitors a chance to 'turn' their own forms. The virtual pottery wheel was realized by means of a 3D-scanner and digital design software. And then the design is printed by the RepRap 3D printer.
Images credit / source: Unfold & unfoldfab
Posted in 3D Printing Technology
Maybe you also like:
- More experiments on 3D printed circuitry
- Results of 3D printing communities survey
- A story behind the design and creation of UltiController
- DARPA crowd-sourcing new technologies through makers
- Sky News reports 3D printing could re-shape the world
- 3D Printing with Clear Acrylic
- Scientists create robot which can 3D-print its own tools
- US government has high expectation from 3D Printing
- 3D printing robot produces "satellite lamp" from recycled CD cases
- TNO shows new platform that makes 3D printing for mass production possible
- Auto-Leveling Platform for 3D printers under development
- 3D printing rubber balloons
- Stratasys to merge with Objet - key facts
- From Chocolate to Ceramics 3D printing
- Progress on 3D Printed circuit board
- More progress with multicolored printing
- A nice video on the "3D printing today and tomorrow" made by Chris Barnett
- Fly 3D printers to Mars and print out spacecraft
- Build a heated build chamber for Rapman 3D printer
- 3D printing robot creates Endless Chairs from melted fridges (Video)
- Time Magazine calls Makerbot CEO a game changer (video)
"And MACHINE ART Works—is A fake and Fraud of the deepest die" -Gegre Ohr 1894
Jack Meoff wrote at 10/6/2014 6:50:08 PM:
Very intersting. I would love to try.
Richard wrote at 8/22/2013 12:55:41 AM:
Can a makerbot extrude ceramic insulation DIRECTLY ON the heating element?
Richard Williamson wrote at 7/5/2013 10:08:16 AM:
Very interesting. What is the cure time on the clay? The reason I ask is that the model you created on the virtual pottery wheel opened outward at the top however the example time clip did not. Would the clay be able to achieve this result or would it flop down?